| Peer-Reviewed

Generation of Hydrocarbon Fuels from Mixed Polymer Wastes Using Decomposer Chamber

Received: 9 February 2018     Accepted: 13 March 2018     Published: 26 March 2018
Views:       Downloads:
Abstract

Disposal of Waste plastics is one of the causes of major environmental problem in the world since they are not biodegradable. It is common to observe thrown plastic waste along with other trash material in the field especially in developing countries. It is indispensable to reduce the environmental concern by converting the plastic waste into hydrocarbon fuels by thermal degradation. In this study we report the conversion of mixed waste plastics (polymers) into hydrocarbon fuels such a slighter gas and liquid fuels using solid decomposer chamber as reactor. Different types of plastics including Low Density Polyethylene (LDPE), polypropylene (PP) and Polystyrene (PS), which have different melting point temperature ranges, were collected and used as raw materials. Reactor was designed and manufactured to thermally degrade these mixed plastic waste materials through Electric heating. The collected waste plastics were placed in the reactor and heated with different temperature ranges from 40 to 300°C, thereby producing hydrocarbon fuels such as lighter gas (C1-C4), naphtha (C7-C10) and kerosene (C12-C15) and were collected based on their temperature ranges. Chemical and physical properties of the products were analyzed qualitatively and the liquid products (naphtha (C7-C10) & kerosene (C12-C15)) formed were analyzed using FT-IR spectrometer spectrum to identify the existing functional groups. Most of the aliphatic compounds including Alkane, alkene, alkyl group and hydroxyls are present in the products.

Published in Journal of Energy and Natural Resources (Volume 7, Issue 1)
DOI 10.11648/j.jenr.20180701.13
Page(s) 18-23
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

Hydrocarbon Fuel, Plastic Waste, Reactor, Thermal Degradation

References
[1] Mohammad M., (2011), waste plastic conversion into chemical product, journal of fundamentals of renewable energy and applications, (1): 1-6.
[2] Browne, M. A., et al, (2011), Accumulations of micro-plastic on shorelines worldwide: Sources and sinks. Environ. Sci. Technol. 45, 9175-9179.
[3] Moinuddin S., et al, (2012), A new technology proposed to recycle waste plastics into hydrocarbon fuel in USA, international journal of energy and environment, 3(5), 749-760.
[4] Passamonti J. Sedran, U., (2012), Recycling of waste plastics into fuels. LDPE conversion in FCC, Appl Catal B Environ 125, 499–506.
[5] Donglei Wu, et al (2010), Low temperature conversion of plastic waste into light hydrocarbons, Elsevier 179, 15–20.
[6] Nitul L., (2015), recycling of plastic wastes, (2): 43-48.
[7] Hayelom Dargo (2014), Recycling of plastic waste into fuels, science publishing, international journal of Science, Technology and Society, 2(6): 190-195.
[8] Kumar S., (2011), Recovery of hydrocarbon liquid from waste high density polyethylene by thermal pyrolysis, Brazilian Journal of Chemical Engineering, 28(4), 659- 667.
[9] Miskolczi N. (2006), High energy containing fractions from plastic wastes by their chemical recycling, Macromol Symp, 4(7): 599–606.
[10] Mustapha Garba1, David Jackson, (2017), Catalytic upgrading of refinery cracked products by trans hydrogenation: a review, Appl Petrochem Res, 7: 1–8.
[11] Amrita k., (2015), recycling and pyrolysis of waste plastics, in. journal of research, 3(9):1-3.
[12] Anil V., et al, (2015), Pyrolysis of PE using the Various Catalysts, 4(8): 039-043.
[13] Asanuma M.,(2004), Recycling of waste plastics in blast furnace. Jpn Inst Energy, 83(4), 252-256.
[14] Balakrishnan C., (2007), Thermal degradation of polystyrene in the presence of hydrogen by catalysts in solution, Polymer Degradation and Stability, (92), 1583-1591.
[15] Delattre C, (2001), Improvement of the micro activity test for kinetic and deactivation studies involved in catalytic cracking, Chem Eng Sci, 56(4): 1337-1345.
[16] Gaurav M., (2014), Conversion of LDPE Plastic waste into liquid fuel by thermal degradation, 2(4): 104-107.
[17] Jagram M., et al, (2015), A Study on polymer & plastic waste and recycling, international Journal of Recent Scientific research, 6(3): 2968-2971.
[18] Kumar S., (2011), Recovery of hydrocarbon liquid from waste high density polyethylene by thermal pyrolysis, Brazilian Journal of Chemical Engineering, 28 (4): 659-667.
[19] Miskolczi N. (2006), High energy containing fractions from plastic wastes by their chemical recycling, Macromol Symp, 4(7): 599–606.
[20] James O, etal, (2016), Lower alkanes dehydrogenation: strategies and reaction routes to corresponding alkenes, Fuel Process Technol 149:239–255.
[21] Jackson S., et al, (1997), Deactivation and regeneration of alkane dehydrogenation catalysts, Elsevier, Amsterdam, 7, 167–174.
Cite This Article
  • APA Style

    Giday Gebregziabher, Solomon Mulaw, Jemal Ebrahim, Abebe Tedla, Haftu Gebretsadik. (2018). Generation of Hydrocarbon Fuels from Mixed Polymer Wastes Using Decomposer Chamber. Journal of Energy and Natural Resources, 7(1), 18-23. https://doi.org/10.11648/j.jenr.20180701.13

    Copy | Download

    ACS Style

    Giday Gebregziabher; Solomon Mulaw; Jemal Ebrahim; Abebe Tedla; Haftu Gebretsadik. Generation of Hydrocarbon Fuels from Mixed Polymer Wastes Using Decomposer Chamber. J. Energy Nat. Resour. 2018, 7(1), 18-23. doi: 10.11648/j.jenr.20180701.13

    Copy | Download

    AMA Style

    Giday Gebregziabher, Solomon Mulaw, Jemal Ebrahim, Abebe Tedla, Haftu Gebretsadik. Generation of Hydrocarbon Fuels from Mixed Polymer Wastes Using Decomposer Chamber. J Energy Nat Resour. 2018;7(1):18-23. doi: 10.11648/j.jenr.20180701.13

    Copy | Download

  • @article{10.11648/j.jenr.20180701.13,
      author = {Giday Gebregziabher and Solomon Mulaw and Jemal Ebrahim and Abebe Tedla and Haftu Gebretsadik},
      title = {Generation of Hydrocarbon Fuels from Mixed Polymer Wastes Using Decomposer Chamber},
      journal = {Journal of Energy and Natural Resources},
      volume = {7},
      number = {1},
      pages = {18-23},
      doi = {10.11648/j.jenr.20180701.13},
      url = {https://doi.org/10.11648/j.jenr.20180701.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jenr.20180701.13},
      abstract = {Disposal of Waste plastics is one of the causes of major environmental problem in the world since they are not biodegradable. It is common to observe thrown plastic waste along with other trash material in the field especially in developing countries. It is indispensable to reduce the environmental concern by converting the plastic waste into hydrocarbon fuels by thermal degradation. In this study we report the conversion of mixed waste plastics (polymers) into hydrocarbon fuels such a slighter gas and liquid fuels using solid decomposer chamber as reactor. Different types of plastics including Low Density Polyethylene (LDPE), polypropylene (PP) and Polystyrene (PS), which have different melting point temperature ranges, were collected and used as raw materials. Reactor was designed and manufactured to thermally degrade these mixed plastic waste materials through Electric heating. The collected waste plastics were placed in the reactor and heated with different temperature ranges from 40 to 300°C, thereby producing hydrocarbon fuels such as lighter gas (C1-C4), naphtha (C7-C10) and kerosene (C12-C15) and were collected based on their temperature ranges. Chemical and physical properties of the products were analyzed qualitatively and the liquid products (naphtha (C7-C10) & kerosene (C12-C15)) formed were analyzed using FT-IR spectrometer spectrum to identify the existing functional groups. Most of the aliphatic compounds including Alkane, alkene, alkyl group and hydroxyls are present in the products.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Generation of Hydrocarbon Fuels from Mixed Polymer Wastes Using Decomposer Chamber
    AU  - Giday Gebregziabher
    AU  - Solomon Mulaw
    AU  - Jemal Ebrahim
    AU  - Abebe Tedla
    AU  - Haftu Gebretsadik
    Y1  - 2018/03/26
    PY  - 2018
    N1  - https://doi.org/10.11648/j.jenr.20180701.13
    DO  - 10.11648/j.jenr.20180701.13
    T2  - Journal of Energy and Natural Resources
    JF  - Journal of Energy and Natural Resources
    JO  - Journal of Energy and Natural Resources
    SP  - 18
    EP  - 23
    PB  - Science Publishing Group
    SN  - 2330-7404
    UR  - https://doi.org/10.11648/j.jenr.20180701.13
    AB  - Disposal of Waste plastics is one of the causes of major environmental problem in the world since they are not biodegradable. It is common to observe thrown plastic waste along with other trash material in the field especially in developing countries. It is indispensable to reduce the environmental concern by converting the plastic waste into hydrocarbon fuels by thermal degradation. In this study we report the conversion of mixed waste plastics (polymers) into hydrocarbon fuels such a slighter gas and liquid fuels using solid decomposer chamber as reactor. Different types of plastics including Low Density Polyethylene (LDPE), polypropylene (PP) and Polystyrene (PS), which have different melting point temperature ranges, were collected and used as raw materials. Reactor was designed and manufactured to thermally degrade these mixed plastic waste materials through Electric heating. The collected waste plastics were placed in the reactor and heated with different temperature ranges from 40 to 300°C, thereby producing hydrocarbon fuels such as lighter gas (C1-C4), naphtha (C7-C10) and kerosene (C12-C15) and were collected based on their temperature ranges. Chemical and physical properties of the products were analyzed qualitatively and the liquid products (naphtha (C7-C10) & kerosene (C12-C15)) formed were analyzed using FT-IR spectrometer spectrum to identify the existing functional groups. Most of the aliphatic compounds including Alkane, alkene, alkyl group and hydroxyls are present in the products.
    VL  - 7
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Chemistry, College of Natural and Computational Science, Debre Berhan University, Debrebirhan, Ethiopia

  • Department of Chemistry, College of Natural and Computational Science, Debre Berhan University, Debrebirhan, Ethiopia

  • Department of Mechanical Engineering, College of Engineering, Debre Berhan University, Debrebirhan, Ethiopia

  • Department of Chemistry, College of Natural and Computational Science, Debre Berhan University, Debrebirhan, Ethiopia

  • Department of Chemistry, College of Natural and Computational Science, Debre Berhan University, Debrebirhan, Ethiopia

  • Sections